14" (355 mm) Steel Garden Edging CAD File
This height of edging is suitable for making raised garden beds, as you can embed 4” to 6” (100mm to 150mm) in the ground and have the remaining 8” to 10” (205mm to 255mm) aboveground to retain soil.
Using these CAD files, you can have your local steel supplier create garden edging out of sheet steel using their in-house plasma cutter. Bypass the supplier’s CAD fee with these files and save a bundle on garden edging by getting it directly from your local steel supplier. (This price is only for the CAD files, not for a physical product.)
If 14” doesn’t suit your taste, we also have the edging available in 6”, 8”, 10”, 12”, 16”, and 18” heights.
This height of edging is suitable for making raised garden beds, as you can embed 4” to 6” (100mm to 150mm) in the ground and have the remaining 8” to 10” (205mm to 255mm) aboveground to retain soil.
Using these CAD files, you can have your local steel supplier create garden edging out of sheet steel using their in-house plasma cutter. Bypass the supplier’s CAD fee with these files and save a bundle on garden edging by getting it directly from your local steel supplier. (This price is only for the CAD files, not for a physical product.)
If 14” doesn’t suit your taste, we also have the edging available in 6”, 8”, 10”, 12”, 16”, and 18” heights.
This height of edging is suitable for making raised garden beds, as you can embed 4” to 6” (100mm to 150mm) in the ground and have the remaining 8” to 10” (205mm to 255mm) aboveground to retain soil.
Using these CAD files, you can have your local steel supplier create garden edging out of sheet steel using their in-house plasma cutter. Bypass the supplier’s CAD fee with these files and save a bundle on garden edging by getting it directly from your local steel supplier. (This price is only for the CAD files, not for a physical product.)
If 14” doesn’t suit your taste, we also have the edging available in 6”, 8”, 10”, 12”, 16”, and 18” heights.
Two versions of CAD files (available in both .dxf and .dwg formats) are included in the .zip file you will be sent, which detail the cut lines for a standard 4ft x 8ft or 4ft x 10ft steel sheet:
46” long pieces, 276” or 23’-0” total length per 4’x8’ sheet
46” long pieces, 368” or 30’-8” total length per 4’x10’ sheet
I recommend ordering the edging in 14 gauge thickness using ASTM A606, Type 4 or A588 (COR-TEN/weathering steel). The 14 gauge steel is a good balance between bend-ability and stiffness for hammering in. See this video for installation instructions.
Once purchased, you will be provided an email with a link for downloading the files. This link will expire after 24 hours. See the following website for instructions on using .zip files.