6" (150 mm) Steel Garden Edging CAD File
Using these CAD files, you can have your local steel supplier create garden edging out of sheet steel using their in-house plasma cutter. Bypass the supplier’s CAD fee with these files and save a bundle on garden edging by getting it directly from your local steel supplier. (This price is only for the CAD files, not for a physical product.)
If 6” doesn’t suit your taste, we also have the edging available in 8”, 10”, 12”, 14”, 16”, and 18” heights.
Four versions of CAD files (available in both .dxf and .dwg formats) are included in the .zip file you will be sent, which detail the cut lines for a standard 4ft x 8ft or 4ft x 10ft steel sheet:
46” long pieces, 736” or 61’-4” total length per 4’x8’ sheet
94” long pieces, 752” or 62’-8” total length per 4’x8’ sheet
46” long pieces, 920” or 76’-8” total length per 4’x10’ sheet
118” long pieces, 944” or 78’-8” total length per 4’x10’ sheet
These different piece lengths give you the flexibility needed for installation. The 94” or 118” lengths are preferable when you have a flat length of edging to install (minimal to no slope with relatively soft ground). The 46” lengths are easier to install given the shorter length, and they conform to a sloped line more easily.
I recommend ordering the edging in 14 gauge thickness using ASTM A606, Type 4 or A588 (COR-TEN/weathering steel). The 14 gauge steel is a good balance between bend-ability and stiffness for hammering in. See this video for installation instructions.
Once purchased, you will be provided an email with a link for downloading the files. This link will expire after 24 hours. See the following website for instructions on using .zip files.